iFixit teardown reveals variable aperture, under-display Face ID and possible display-frame issue in iPhone 18 Pro
Միայն փաստեր

iFixit teardown reveals variable aperture, under-display Face ID and possible display-frame issue in iPhone 18 Pro

Ամփոփում

iFixit’s teardown of the iPhone 18 Pro details the new variable-aperture camera, under-display Face ID sensor and larger vapor chamber, and notes a plastic frame problem that could affect display repairs.

iFixit has released its teardown of Apple’s iPhone 18 Pro, highlighting several hardware changes introduced with the model. The device features a variable-aperture camera whose six tiny blades are driven by electromagnets, a mechanism that operates separately from the optical image-stabilization system. During disassembly, a blade detached, indicating that a stuck aperture would likely require replacement of the entire camera module.

The new iPhone also places the infrared Face ID camera beneath the display while keeping the selfie camera and dot projector in the Dynamic Island. Microscopic examination showed Apple removed alternating rows of pixels above the sensor and added an infrared-pass filter beneath the OLED layer; the filter does not reach the edge of the opening, creating an “eclipse effect” under certain viewing conditions.

Apple’s cooling architecture has been expanded with a larger vapor chamber. The A20 Pro processor is packaged side-by-side with memory, allowing direct contact with the chamber, which is three times the surface area of the previous generation’s unit. iFixit observed the thermal interface material that presses the chip against the chamber and noted the chamber’s coverage across much of the phone’s interior.

A potential repairability concern emerged when iFixit found the plastic frame surrounding the display damaged on three of four units examined. While other teardowns have not reported the same problem, iFixit cautioned that the issue might stem from the new thermal system pulling heat away from the display as the heating pad softens the adhesive, potentially affecting water-resistance after reassembly.

The teardown also confirmed that certain components, such as the USB-C port, remain difficult to access, requiring extensive internal disassembly. Nevertheless, the iPhone 18 Pro retains some repair-friendly features from its predecessor, including a glue-free battery tray and modular camera assemblies. iFixit provisionally assigned a repairability score of 7 out of 10 to both the iPhone 18 Pro and Pro Max pending further testing.

Աղբյուր

9to5Mac

Շարունակեք կարդալ — անվճար

Ստեղծեք անվճար հաշիվ՝ նորություններին հետևելու համար։ Քարտ չի պահանջվում։