NASA tests power-saving maneuver on Voyager 2 ahead of similar operation on Voyager 1
Just the facts

NASA tests power-saving maneuver on Voyager 2 ahead of similar operation on Voyager 1

Summary

Engineers at JPL successfully performed a power-conservation sequence on Voyager 2 and plan to repeat it on Voyager 1 to extend the probe’s operational life as it approaches a light-day from Earth.

NASA’s Jet Propulsion Laboratory announced that a power-saving sequence, dubbed the “big bang,” was successfully carried out on the Voyager 2 spacecraft. The maneuver toggles specific heaters, a tape-recorder unit and a propulsion component in a coordinated pattern, reducing the probe’s power consumption by about 10 watts per year without endangering critical systems.

The test was conducted on Voyager 2 because it is nearer to Earth and has a larger power margin. Mission manager Kareem Badaruddin said the procedure has proceeded “remarkably smoothly.”

Both Voyager probes rely on plutonium-238 thermoelectric generators, which lose roughly 4 watts of output annually as the fuel decays. By selectively shutting down two heaters and an eight-track data recorder while activating two other heaters and a propulsion system, engineers aim to conserve energy for scientific instruments.

The ultimate goal is to apply the same technique to Voyager 1, now more than 15 billion miles from Earth, to keep its remaining instruments—plasma wave and magnetic field detectors—operational. The savings could also allow the Low-energy Charged Particles experiment, which was turned off earlier this year, to be re-activated.

If the maneuver is implemented before November, Voyager 1 will pass the one-light-day distance from Earth, a milestone that will increase communication latency to over 24 hours. Project manager Suzanne Dodd has expressed confidence that the probe will reach its 50th anniversary in September 2027.

Source

Gizmodo

Keep reading — for free

Create a free account to follow the news. No card required.